Tech Tips Presented by Evercoat

Tim takes the time to review the fiber-reinforced fillers and their application over a “proper weld,” explains what a “proper weld” is, how to do it, and epoxy primer pre-coats, and how it all correlates to the Evercoat Fiber Reinforced Filler Tech Tip.

How does the work time relate to the temperature and sanding time for the EVERCOAT Products? Tim talks through the range of products and their working times compared to gel times, sanding times, and primer times. Then Tim covers some tips and tricks to help deal with using polyester fillers in the summer with high heat.

Evercoat has been making products that work with aluminum for over 40 years. Tim talks through the products and their differences and give some pointers for repairing some of the newer aluminum panels.

What is the Optex® Technology from EVERCOAT and how can it help in the repair process? Tim talks through the Optex® Fillers and Primer to help explain the product differences and how they can be used to help through the repair process for their color-changing and sanding features.

What are the fiberglass reinforced fillers from EVERCOAT, what are their differences, and how to use them? Tim walks through the differences, where they can be used, and some tricks for using them along with the specialty fillers (Vette Panel Adhesive/Filler and Metal-2-Metal) for their proper application and usage.

Since the launch of the EVERCOAT Light System™ at the 2021 SEMA Show there have been some questions about the products so Tim takes some time to address some of the top ones for the Optex® Light Speed™ Premium Filler, Light Speed™ 440 Express and Light Speed ™ LED Cure High Build Primer.

How does the work time relate to the temperature and sanding time for the EVERCOAT Products? Tim talks through the range of products and their working times compared to gel times, sanding times, and primer times. Then Tim covers some tips and tricks to help deal with using polyester fillers in the summer with high heat.

Tim talks about ghost mapping to explain what it is and what causes it, then talks about ways to avoid your repairs from showing up after paint. Tim talks about creating the correct bevel edge for fiberglass and composite repairs, and some tips and tricks to get the best repair possible.

Ever tried to thicken or thin an Evercoat Filler or Putty? Ever wondered if it could be done and how to go about doing it correctly. This month Tim talks about why and how to go about doing it the right way, and why to avoid the incorrect ways that cause problems.  

 

Read more

Tim talks about the change of seasons and the changes in the weather to address some of the issues that technicians deal with. This month Tim covers some helpful tips like application temperatures for polyesters, some ideas for ensuring that all your repairs go without a hitch and some things to not do to help avoid those pitfalls.

Read more

The boating season is still going strong, but some boaters have had questions about gel coat repairs and how to do them. Tim recalls a phone call from a friend about how to do a repair, and takes the time to talk through the key points for doing a quality gel coat repair.

Tim and Jeremy Winters of Booth Talk talk about the Optex Filler and Putty and the use proper use of 440 Express.

 

Booth Talk Podcast: https://www.podbean.com/ew/pb-zxhty-ef7807 

440 Express Application: https://youtu.be/xs10X-jOOi4

 

Fighting the summer heat?   Tim talks about some tips and tricks to deal with applying EVERCOAT Products in the summer heat. 

Tim and Jeremy of Booth Talk candidly talk about the differences between urethane and polyester primers and the benefit of polyester primers for the collision and restoration shops. Listen in for their discussion on the evolutions of polyester primers, application tips and tricks, and Evercoat’s progress up to the new 4:1 Polyester Primer with a built in guide coat.

Ever wondered what the difference was between a laminating resin and a finishing resin, or a laminating gel coat and a finishing gel coat? Tim with Evercoat breaks down the differences and also shares some tips and tricks for using Evercoat resins and gel coats for fiberglass repairs.

Why sunny days aren't always best to open the shop doors. Longer days with warmer sunny weather doesn't always mean that the temperature is warm enough. Cooler nights are still a factor and all the repair materials need to be used at the right temperature.   

Primary causes for pinholes in body work and some of the ways to avoid them.