Jeff Evans on Repairing Water-Damaged Ceilings

Water damage can weaken ceiling materials, create stains, and lead to mold. Jeff Evans explains how to spot water damage early, what causes it, and how to fix it. His advice helps homeowners take simple steps to protect their ceilings from long-term harm.

Water damage often starts with a leak. Common causes include:

• A leaking roof

• A broken pipe

• A clogged drain

• An overflowing toilet or bathtub

• Poor ventilation

Jeff Evans points out that water damage often spreads before people notice it. A slow drip from above can lead to a soft spot in the ceiling. If ignored, the ceiling may sag or collapse.

Jeff Evans advises homeowners to look for warning signs. These include:

• Yellow or brown stains

• Peeling paint

• Bubbles under the paint or drywall

• A musty smell

• Damp spots after rain or plumbing use

If you see these signs, Jeff Evans recommends checking the area above the ceiling. This helps find the source of the problem before it grows worse.

Jeff Evans breaks the process into six clear steps. He stresses the importance of acting quickly.

Before any repair begins, Jeff Evans says to find and stop the leak. Use a flashlight to check pipes, roof areas, or vents above the damage. If you cannot find the source, call a licensed plumber or roofer.

Once the leak stops, remove all moisture. Use fans, a dehumidifier, or both. Jeff Evans says the ceiling must be completely dry before any repair. Wet drywall can hide mold and rot.

Jeff Evans explains that only dry, solid parts of the ceiling can stay. Cut away soft, cracked, or moldy sections using a utility knife or drywall saw. Remove all insulation that is damp or dirty.

If mold is present, Jeff Evans recommends using a mix of water and white vinegar. Spray the area and let it sit for an hour. Wipe it clean and let it dry. Always wear gloves and a mask during this step.

Measure the gap where you removed damaged drywall. Cut a new piece to match. Use drywall tape and joint compound to seal the edges. Jeff Evans says to apply thin layers, letting each dry before adding more. Sand the area smooth when finished.

Jeff Evans advises using a stain-blocking primer before painting. This stops old stains from showing through. Choose a paint that matches the existing ceiling color. Two coats are often enough.

Jeff Evans warns against three common errors.

1. Not fixing the leak first: Repairs will fail if water still enters the ceiling.

2. Skipping the drying step: Moisture will weaken repairs and allow mold to grow.

3. Using regular primer: Ceiling stains can bleed through basic paint.

Jeff Evans estimates a small repair takes one to two days, including drying time. Larger jobs may take up to a week. The most time-consuming part is waiting for each layer to dry.

Some ceiling damage is too serious for DIY repairs. Jeff Evans says you should call a professional if:

• The ceiling sags or bulges

• Mold covers a wide area

• You cannot find the leak

• The damage keeps coming back

Professionals can handle large areas, structural repairs, and plumbing or roofing fixes. They also check for hidden issues that may affect safety.

Jeff Evans shares simple tips to avoid repeat problems.

• Inspect your roof twice a year

• Clean gutters to prevent overflow

• Check pipes for leaks

• Use exhaust fans in bathrooms

• Insulate pipes in cold weather

• Test water shut-off valves yearly

Prevention saves time and money. It also helps k