Alone in the Dark (2005) vs Jaws the Revenge (1987)

How to Clean a Lawnmower: Step-by-Step Guide

1. Safety First

   • Disconnect the spark plug to prevent accidental starting.
   • Ensure the lawnmower is turned off and cool.

2. Prepare Your Workspace

   • Place the mower on a flat, stable surface.
   • Wear gloves and safety goggles.
   • Have tools like a brush, hose, scraper, and cleaning solution ready.

3. Remove Debris

   • Use a stick or scraper to clear grass, leaves, and dirt from the deck and blades.
   • Avoid using your hands to prevent injuries.

4. Wash the Deck and Blades

   • Tip the mower on its side (carburetor side up to avoid damage).
   • Spray water on the underside to loosen stubborn debris.
   • Scrub with a brush and mild soap if needed.

5. Clean the Air Filter

   • Remove the air filter cover and check the filter.
   • Replace paper filters if clogged, or wash foam filters with soap and water, letting them dry before reinstalling.

6. Check and Clean the Blades

   • Inspect blades for damage or dullness.
   • Clean with a cloth and sharpen if necessary.

7. Wipe the Exterior

   • Use a damp cloth to clean the mower's exterior.
   • Avoid water near the engine or electrical components.

8. Reconnect the Spark Plug

   • Once everything is clean and dry, reconnect the spark plug.

9. Dispose of Waste Properly

   • Throw grass clippings and debris into compost or yard waste bins.

10. Final Check

• Start the mower to ensure it runs smoothly.